Makita 18V Li-Ion Brushless Impact Driver 5.0ah Battery Combo kit DTD172RG

• Slim Tool Body with a re-designed head that is slimmer than the previous model enabling the tool to have greater access to tight corners or confided spaces.
• One Touch Bit Installation has been designed to prevent the bit from unexpectedly falling off. A more effective mechanism has been designed increasing the strength of the chuck without increasing the resistance required to install a bit.
• Enhanced Anvil Holder: material change from needle bearing to ball bearing provides reduction of bit wobbling. Providing more stability and control when fastening
• Quick Change Selector: one touch mode selector located above the trigger allows the user to jump between modes single handed. Quickly changing between modes improves efficiency as you no longer have to take your hand off the tool.
• Light Mode enables the tool to be used as a torch in dark environments. To turn the light on set the F/R change lever to the neutral position and pull the switch trigger. To turn off the light pull the trigger again.
• 4 Optimised Application Modes; T-mode 1 and 2 for self-drilling screws in both thick and thin sheet metal. Wood mode for fastening long wood screws. Bolt mode with rotation auto stop for tightening / loosening bolts.
• 4-Speed Power Selection allow the user to adjust the power, speed and impact rate to suit the fastening application

• Voltage: 18V
• Drive shank: 6.35mm (1/4") Hex
• Max tightening torque:
• Max: 180Nm
• Hard: 170Nm
• Med: 50Nm
• Soft: 20Nm
• No load speed:
• Max: 0 - 3600rpm
• Hard: 0 - 3200rpm
• Med: 0 - 2100rpm
• Soft: 0 - 1100rpm
• Impact rate:
• Max: 0 - 3800ipm
• Hard: 0 - 3600ipm
• Med: 0 - 2600ipm
• Soft: 0 - 1100ipm
• Max capacity:
• Standard bolt: M5 - M16
• High tensile bolt: M5 - M14
• Length: 114mm
• Weight: 0.9kg

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Up to 66% more run time per charge compared to BL1830
• Fast 45 minute charging time
• Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
• Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications

• Voltage: 18V
• Cell capacity: 1.5Ah - 6.0Ah
• Charge Time: 
• 1.5Ah: 15mins
• 3.0Ah: 22mins
• 4.0Ah: 36mins
• 5.0Ah: 45mins
• 6.0Ah: 55mins
• Length: 185mm
• Weight: 0.82kg

Include : 

• 1 X Makita 18V Li-ion Cordless Brushless 4-Stage Impact Driver DTD172Z 
• 1 X Makita 18V 5ah Battery with Gauge - BL1850B
• 1 X Makita DC18RC 18V Li-Ion Cordless Battery Fast Charger - DC18RC